|
| |
TM 5-4320-304-14
TM 08922A-14/1
6-3. REPAIR/REPLACE CONNECTING ROD
This task covers:
a. Removal
c. Repair
b. Inspection
d. Installation
INITIAL SETUP
Tools
Shop set, automotive repair,
field maintenance, basic
Allen socket, 6 mm
612
091
00
Materials/Parts
Diesel fuel oil (ltem 2, Appendix E)
Dry cleaning solvent (Item 10, Appendix E)
Lubricating oil (ltem 6, Appendix E)
References
Para 5-11
Cylinder
Para 6-7
Crankshaft Assembly
MIL-I-6868 Magnetic Particle Inspection
Equipment
Condition
Para
Condition Description
5-12
Piston removed from engine.
General Safety Instructions
Well-ventilated area required.
REMOVAL:
1
2
3
4
5
6-6
Using Allen wrench, remove cover (1) with four
caps (2) and Allen screws (3).
Remove and discard preformed packing (4).
When removing connecting rod, make sure
it does not knock against crankcase. This
could result in serious damage to con-
necting rod.
Using Allen socket 612 091 00, remove two Allen
screws (5) and remove bottom half of connecting
rod (6).
of crankcase.
Remove two bearing
of connecting rod (6
Remove top half of connecting rod (7) from top
halves (8) from both halves
a n d 7 ) .
|
