|
| |
TM 5-4320-304-14
TM 08922A-14/1
5-10. lNSPECT/REPLACE CYLINDER HEAD AND VALVE ASSEMBLY (Continued)
9 Remove pushrod (1) and complete pushrod (2)
from protection tubes (3).
10 Remove protection tubes (3), preformed pack-
ings (4), shims (5), and pressure springs (6).
NOTE
Complete pushrod (2) belongs to in-
jection pump side of engine.
DISASSEMBLY:
Do not scratch the cylinder head sealing face. Scratches
could cause poor sealing of cylinder head and cylinder.
1 Press down cup (1) and remove collets (2).
2 Remove valve spring (3), washer (4), and
cap (5).
3 Remove valve (6) from cylinder head (7).
5-26
|
