| |
TM 5-4320-304-14
TM 08922A-14/1
5-5. REPLACE ENGINE ASSEMBLY (Continued)
INSTALLATION:
Death or serious injury could occur if unauthorized or unnec-
essary personnel are in the hoisting area. Permit only person-
nel actually engaged in the hoisting operation to be near the
unit and hoisting equipment. All instructions for the hoisting
operations must come from one authorized person.
Death or serious injury to personnel or damage to equipment
could occur from improper hoisting. Hoist the load slowly
to avoid tearing out lifting strap, slipping slings, or load
shift. Do not jerk the load or swing it from side-to-side when
hoisting. This places additional stress on hoisting components
which can cause failure and loss of load. Be sure hoisting
equipment is on solid footing and is suitable for the size of
the load. Watch boom angle and overhead clearance when
hoisting.
1
Attach lifting equipment.
Lift and carefully lower engine assembly (5). Aline mounting holes
on engine and engine brackets.
2
Install four hex screws (2) and four spring washers (3) on each engine bracket (4). Tighten
securely.
5-7
|