|
|
TM 5-4320-234-34
Table 2-1. Troubleshooting - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ENGINE CONTINUED
Figure 2-12. Engine timing mark pointer.
(12) Mount the magneto In a vise thoroughly lined with soft cloths. Insert a spark plug cable intosd ibutor block hole for
i tr
spark plug no. 6. Refer to figure 2-13. Turn the drive lugs clockwise while holding the high tension cable for no. 6
cylinder close to the magneto frame so that a spark will are when the no. 6 cable is energized. When no. 6 cable arcs,
the magneto is at the no.6 firing position. Hold the magneto drive shaft at this position.
2-15
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |