|
| |
TM 5-4320-228-13&P
(3)
damage.
(4)
Inspect fuel lines for cracks, distortion, or other
Replace all damaged or defective parts.
c.
Installation.
(1) Using figure 4-2 repeat the removal procedure in reverse
sequence.
4-3.
EXHAUST SYSTEM.
The exhaust system maintenance and inspection procedures, with
the exception of the mufflers, are listed and illustrated in TM 5-2805-
203-14.
This section covers maintenance of the mufflers.
a.
Removal.
(1) Refer to figure 4-3. Remove screws (1), muffler (2),
and gasket (3).
Figure 4-3.
Exhaust system removal.
b.
Cleaning and Inspection.
(1) Clean exterior of mufflers with wire brush.
(2) Inspect mufflers for cracks, holes, or other damage.
(3) Replace mufflers if defective.
c.
Installation.
(1) Refer to figure 4-3.
Repeat the removal procedure in
reverse sequence.
4-4
|
