|
| |
TM 07661B-14/1
APPENDIX A
(11)
Apply a moderate amount of Loctite 242 (blue) to male threads of screw (4), using care not to allow Loctite
to contact the seal (6). While holding the seal and washers in position, thread the screw (4) into stem (18) and tighten to
24 inch pounds. Let Loctite allow to dry for 1 hour.
(12)
Lubricate o-ring (2) with silicone grease and install on forward seat (1). Thread the seal into the valve body
(3) and tighten securely.
(13)
Install valve handle (12), positioning as in original assembly. Handle on left hand valve assembly will be
rotated 1800 in respect to inlet.
Figure A 3-25. Nozzle Assembly
A 3-55
|
