|
| |
TM 5-3825-220-13&P
6-3.1 Pumps and Engines (GFE) - Cont'd
"W"
10. Check exhaust manifolding for tightness. Tighten if necessary.
"D"
11. Check vibration levels. Report changes.
"D"
12. Initiate and schedule repairs if faults are found.
"W"
13. If pump assembly is not in operation, it should be jacked over (rotated) at least once per week or briefly
started.
6-3.2 Fabric Collapsible Tanks and Appurtenances (GFE)
a.
Detailed manufacturer's preventative maintenance instructions are in the technical manuals referenced in para.'s
6-1.3 and 6-1.4.
b.
Essential preventative maintenance is:
"D"
1. Clean dirt off system.
"D"
2. Check tank for flaws, scratches, tears and leaks. Repair and/or report any found.
"W"
3. Inspect berms for faults.
"W"
4. Check that berm drain is closed.
"D"
5. Check that the hose line lay is not cocking the filler/discharge connection.
"D"
6. Observe that vent valve is operable and clean.
"D"
7. Check that range poles are properly in place.
"D"
8. Check tightness of all hose connections.
"D"
9. Check for valve stem packing leaks. Tighten packing gland if necessary.
"D"
10. Check inside of berm to make sure no sharp objects that could damage tank are
present.
"D"
11. Initiate and schedule repairs if faults are found.
6-3.3 Filter Separators (GFE)
a.
Detailed preventative maintenance practice is covered in the technical manual referenced in par. 6-1.5.
b.
Essential preventative maintenance is:
"D"
1. Check differential pressure. Change filter elements if necessary.
"D"
2. Check for damaged gage lines, gages, etc.
"D"
3. Clean any dirt off system.
6-7
|
