|
| |
TM 10-6630-247-13&P
4-16. CABINET REPAIR - cont.
CABINET. Refer to figure 4-13.
(34) Remove two rivets (1) and clasp (2) from work top(5).
(35) Remove two rivets (3) and strike (4) from work top (5).
(36) Remove 22 rivets (6) and separate work top (5) from cabinet (43).
(37) Open chain hooks (7) and disconnect chains (8) from cabinet (43). Disconnect chains from
quick release pins (9). Open chain hooks (44 and 46) and disconnect
chain (45) from cabinet (43) and loading plan (47).
(38) Remove two rivets (10 and strap loop (11) from cabinet (43).
(39) Remove two rivets (12) and strap loop (13) from cabinet (43).
(40) Remove two rivets (14) and strap loop (15) from cabinet (43).
(41 Remove two rivets (16) and clips (17) from cabinet (43).
(42) Using wrap, remove four foam sheets (18) and from sheet (20) from pan (19).
(43) Using scraper, remove foam sheets (21 and 22) from pan (24).
(44) Using scraper, remove foam sheet (23) from under pan (24).
(45) Using scraper, remove foam sheet (25) from front of cabinet (43).
(46) Using scraper, remove foam sheet (26) from side of cabinet (43).
(47) Remove two rivets (27) and strap (28) from cabinet (43).
(48) Using scraper, remove pile strip (29) from pan (19).
(49) Remove two rivets (30) and clip (31) from cabinet (43).
NOTE
Remove only the small diameter, outer-most rivets to remove handle.
(50) Remove 14 rivets (32) and handle (33) from cabinet (43). Repeat for handle on other side
of cabinet (43).
(51) Remove two rivets (34) and strap loop (35).
(52) Using scraper, remove foam sheet (36) from between two clips (38).
(53) Remove two rivets (37) and two clips (38) from cabinet (43).
4-31
|
