|
| |
TM 10-6630-247-13&P
4-16. CABINET REPAIR - cont.
Door Dividers and Lock. Refer to figure 4-11.
NOTE
All cabinet dividers are glued in place. Destruction of the dividers may
be required for removal. Remove only those dividers required to perform
required repairs.
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)
(21)
Remove four screws (1) from side of cabinet door (21).
Remove divider (2) and pipe support (3) from cabinet door (21).
Remove divider (4) from cabinet door (21).
Remove divider (5) from cabinet door (21).
Remove divider (6) from cabinet door (21).
Remove dividers (7 and 8) from cabinet door (21).
Remove divider (9) from cabinet door (21).
If required, remove wood supports (10 and 11) from divider (9).
Remove ten rivets (12) from lock plate (13).
Remove two rivets (14) from lower rod guide (15). Repeat for upper guide.
Turn lock plate (13) about 1/4 turn to the right so that notches in retaining plate ( 18) aline
with rods (16 and 17) as shown.
Separate rods (16 and 17) from back of lock plate (13).
Remove lock plate (13) from front of cabinet door (21).
If required, remove four rivets (19) and nameplate (20) from cabinet door (21).
4-26
|
