|
| |
TM 10-6630-247-13&P
4-16. CABINET REPAIR.
This task consists of:
a. Disassembly
b. Cleaning
c. Inspection
d. Repair
e. Assembly
f. Adjustment
INITIAL SET-UP:
Tools:
Blind Rivet (4) (Item 6, App J)
General Mechanics Tool Kit (App B, Sec III,
Blind Rivet (28) (Item 7, App J)
Item 1)
Blind Rivet (24) (Item 8, App J)
Hand Riveter (App B, Sec III, Item 2)
Blind Rivet (2) (Item 9, App J)
Drill (App B, Sec III, Item 3)
Blind Rivet (12) (Item 10, App J)
Bit Set (App B, Sec III, Item 3)
Blind Rivet (2) (Item 11, App J)
Equipment Condition:
Spring Pin (4) (Item 12, App J)
Leg supports removed (para 4-15)
Spring Pin (4) (Item 13, App J)
Material/Parts:
Adhesive (Item 1, App F)
Blind Rivet (20) (Item 3, App J)
Wiping Rags (Item 2, App F)
Blind Rivet (4) (Item 4, App J)
Blind Rivet (6) (Item 5, App J)
NOTES
l Ensure that all parts identified as mandatory replacement parts are
discarded and replaced with new components.
l Cabinet repair is limited to replacement of defective components.
Disassemble the cabinet only to the level required to effect repairs.
a.
Disassembly.
RIGHT CABINET DOOR.
Cabinet Retainers and Foam. Refer to figure 4-10.
(1)
Remove two screws (1) and separate retainer (2) from cabinet door (12).
(2)
Remove two screws (3) and separate retainer (4) from cabinet door (12).
(3)
Remove two screws (5) and separate retainer (6) from cabinet door (12).
(4)
Remove three screws (7) and separate door (8) from cabinet door (12).
(5)
Using scraper, remove foam block (9) from cabinet door (12).
(6)
Using scraper, remove foam block (10) from cabinet door (12).
(7)
Using scraper, remove foam block (11) from cabinet door (12).
4-24
|
