|
| |
TM 10-6630-247-13&P
2-12. PREPARATION FOR MOVEMENT - cont.
NOTE
Cabinet doors fit snugly into face of cabinet. Foam rubber used to secure
components in the cabinet must be compressed when closing cabinet
doors.
(7)
While pushing in on right door (9), turn door handle (4) to the left to lock doors in closed
position.
(8)
Pull out carrying handles (2) from both sides of cabinet (1).
WARNING
The test kit is heavy and can be difficult to handle. Four personnel are
required to lift and transport the test kit. A fifth person is required to
raise the legs of the cabinet while cabinet is held up off ground.
(9)
Using four personnel, lift cabinet (1) off ground.
(10) Unlock four barrel bolts (7) and retract leveling legs (8). Lock barrel bolts into leveling
legs when fully retracted.
(11) Unlock four leg braces (6).
(12) Fold legs (5) up under cabinet (1) and secure in place with two detent pins (3).
(13) Lower cabinet (1) to ground.
(14) Push carrying handles (2) into sides of cabinet(1).
2-37
|
