|
| |
TM 10-6630-247-13&P
2-7. ASSEMBLY AND PREPARATION FOR USE - cont.
Assemble Condenser Support. Refer to figure 2-10.
NOTE
Make sure all stowed components are removed from condenser before
assembly.
(10) Unfold lower support (1).
(11) Remove two wingmuts (2) from upper support (3).
(12) Position upper support (3) on lower support (1) and secure with two wingnuts (2).
(13) Position condenser (4) on assembled support (5).
(14) Place cover (6) on top of condenser (4).
(15) Set drain valve (7) to close.
2-22
|
