|
| |
TM 10-5430-242-12&P
0007 00
0007 00-1
Change 1 – 28 April 2002
OPERATOR AND UNIT MAINTENANCE
(INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
COLLAPSIBLE FABRIC TANKS, FUEL STORAGE, 3,000,
10,000, 20,000, AND 50,000 GALLON
OPERATOR TROUBLESHOOTING PROCEDURES
INTRODUCTION TO OPERATOR TROUBLESHOOTING
This Troubleshooting Procedures chapter lists common malfunctions that may be found during the
operation or maintenance of the collapsible fabric fuel tank assembly or its components. Perform the
tests/inspections and corrective actions in the order listed in the table.
This manual cannot list all malfunctions that may occur, nor all tests or inspections and corrective actions.
If a malfunction is not listed or is not corrected by listed corrective actions, notify supervision.
WARNING
To prevent injury, read all warnings in the front of this manual
before performing troubleshooting.
TROUBLESHOOTING PROCEDURE
FUEL TANK
SYMPTOM
The tank leaks.
MALFUNCTION
Inspect the tank for punctures or tears.
CORRECTIVE ACTION
Perform emergency repairs. See WP 0006 00.
The tank cannot be repaired.
CORRECTIVE ACTION
Notify Unit Maintenance.
TROUBLESHOOTING PROCEDURE
FILLER/DISCHARGE GATE VALVE ASSEMBLY (GTA MODELS)
SYMPTOM
Female coupling or male flange adapter leak.
MALFUNCTION
Check the female coupling for missing or loose hex-head cap screws, hex nuts,
washers, and lockwashers. Check for damaged or missing coupling gasket.
|
