|
| |
TM 10-5430-242-12&P
0030 00
0030 00-2
SERVICE
WARNING
Dry cleaning solvent, A-A-59601, used to clean parts, is potentially dangerous to
personnel and property. It produces toxic and flammable fumes. Use only in well
ventilated areas. Avoid repeated and prolonged skin contact. Do not use solvent
near an open flame or near excessive heat. The flash point of the solvent is 100F
to 130F (38 C to 59 C).
CAUTION
Dry cleaning solvent, A-A-59601, used to clean parts, must not come into contact
with any part of the fuel tank fabric. Damage to the fabric will occur.
1. Clean all mechanical parts with dry cleaning solvent and dry thoroughly with rags.
2. Clean the tank exterior with detergent and hot water.
3. Inspect all mechanical parts for cracks, dents, breaks, and wear. Replace the component if
unserviceable.
INSTALLATION
NOTE
Prior to the installation of fuel tank assemblies, the drain end of the tank will unroll first.
1. Unroll the tank and unfold the sides using tank handles to position the tank.
2. Install the tank drain fitting assembly (WP 0029 00).
3. Install the filler/discharge assemblies (WP 0027 00 or WP 0028 00).
4. Install the vent fitting assembly (WP 0025 00 or WP 0026 00).
END OF WORK PACKAGE
|
