|
| |
TM 10-5430-242-12&P
0029 00
Change 1
0029 00-2
1. Clean all parts with dry cleaning solvent and dry thoroughly with rags.
2. Clean packing grooves thoroughly with detergent and hot water.
3. Inspect all mechanical parts for cracks, dents, breaks, and wear. Replace the component if
unserviceable.
ASSEMBLY
1. Lubricate new o-ring (9) with silicone compound. Position o-ring (9) into the packing groove located
on the tank fitting.
2. Position drain cover plate (5) on the tank fitting, and align the fastening holes.
3. Install drain cover plate (5) and bracket (6) to the tank fitting with eight screws (7) and washers (8), by
hand tightening screws (7).
4. Attach the S-hook of chain assembly (1) to bracket (6). Torque all screws (7) to 15 ft-lb (20.34 N m)
for Reliance Models or 16 ft-lbs (21.70 N m) for GTA and MPC Models.
5. Apply sealing compound or anti-seize tape to drain plug screw (3) threads.
6. Install drain plug screw (3), bracket (2), and drain plug (4) to drain cover plate (5). Attach the S-hook
of chain assembly (1) to bracket (2).
END OF WORK PACKAGE
3
7
4
6
5
1
2
8
9
|
