|
| |
TM 10-5430-242-12&P
0025 00
0025 00-1
OPERATOR AND UNIT MAINTENANCE MANUAL
(INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
COLLAPSIBLE FABRIC TANKS, FUEL STORAGE, 3,000,
10,000, 20,000, AND 50,000 GALLON
VENT FITTING ASSEMBLY (GTA MODEL)
SERVICE, REPLACEMENT, REPAIR
INITIAL SETUP
Tools
Mandatory Replacement Parts
Tool Kit General Mechanics
Gasket
(Item 1, WP 0036 00)
(Item 3, WP 0044 00)
Torque Wrench (ft-lb)
Gasket Cap
(Item 3, WP 0036 00)
(Item 8, WP 0044 00)
O-Ring
Materials/Parts
(Item 9, WP 0044 00)
Dry Cleaning Solvent
Relief Cap Gasket
(Item 7, WP 0042 00)
(Item 10, WP 0044 00)
Rags, Wiping
(Item 2, WP 0042 00)
Silicone Compound
(Item 10, WP 0042 00)
REMOVAL
1. Remove eight screws (1) and washers (2) from vent and pipe assembly (3).
2. Lift male-flanged adapter (4) from tank fitting (5).
3. Remove and discard O-ring (6) from packing groove (7) located in tank fitting (5).
DISASSEMBLY
1. Remove female quick-disconnect coupling (8) from male-flanged adapter (4) by pulling outward on
cam-lever arms (9), and lifting female quick-disconnect coupling (8) from male-flanged adapter (4).
2. Remove and discard gasket (10) from female quick-disconnect coupling (8).
3. Rotate vent pipe (11) counterclockwise until the vent pipe threads disengage from female quick-
disconnect coupling (8), and remove female quick-disconnect coupling (8) from vent pipe (11).
4. Rotate relief cap (12) counterclockwise until the relief cap threads disengage from vent pipe (11).
Remove the relief cap (12) from the vent pipe (11).
5. Remove and discard relief cap gasket (13) from inside relief cap (12).
6. Rotate flame arrestor (14) counterclockwise until the flame arrestor threads disengage from relief cap
(12). Remove flame arrestor (14) from relief cap (12).
7. Remove and discard gasket (15) from inside dust cap (16).
8. Remove vent relief cap screw (17), washer (18), and gasket (19) from lever head assembly (20).
Discard gasket (19).
|
