|
| |
TM 10-5430-242-12&P
0023 00
0023 00-1
OPERATOR AND UNIT MAINTENANCE MANUAL
(INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
COLLAPSIBLE FABRIC TANKS, FUEL STORAGE, 3,000,
10,000, 20,000, AND 50,000 GALLON
TANK OR BERM LINER DRAIN BALL VALVE
SERVICE, REPLACEMENT, REPAIR
INITIAL SETUP
Tools Mandatory Replacement Parts
Tool Kit General Mechanics Gasket
(Item 1, WP 0036 00) (Item 3, WP 0044 00)
Materials/Parts
Anti-seize Tape
(Item 1, WP 0042 00)
Dry Cleaning Solvent
(Item 7, WP 0042 00)
Rags, Wiping
(Item 2, WP 0042 00)
Thread Sealing Compound
(Item 9, WP 0042 00)
REMOVAL
Remove the drain ball valve from the drain hose assembly.
DISASSEMBLY
1. Pull cam-lever arms (1) on dust cap (2) out, away from body of dust cap (2).
2. Remove dust cap (2) from male coupling (3). Remove gasket (4) from dust cap (2).
3. Disconnect chain (5) and two key rings (6) from dust cap (2) and male coupling (3).
4. Unthread male coupling (3) from ball valve (7).
5. Pull cam-lever arms (8) on female coupling (9) out, away from body of female coupling (9).
6. Remove dust plug (10) from female coupling (9). Remove gasket (11) from dust plug (10).
7. Disconnect chain (12) and two key rings (13) from dust plug (10) and female coupling (9).
8. Unthread female coupling (9) from ball valve (7).
1
2
3
4
5
6
7
8
9
10
11
12
13
|
