|
| |
TM 10-5430-242-12&P
0014 00
0014 00-1/2 blank
OPERATOR AND UNIT MAINTENANCE MANUAL
(INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
COLLAPSIBLE FABRIC TANKS, FUEL STORAGE, 3,000,
10,000, 20,000, AND 50,000 GALLON
FILLER/DISCHARGE ASSEMBLY ELBOW AND DUST CAP GASKET
REPLACEMENT
INITIAL SETUP
Mandatory Replacement Parts
Gasket
(Item 1, WP 0044 00)
REMOVAL
1. Remove elbow (1) or dust cap (2) by pulling outward on cam-lever arms (3), and lifting elbow (1) or
dust cap (2) from flanged adapter (4).
NOTE
Fill end female/female elbow has two gaskets.
2. Remove gasket (5) from elbow (1) and gasket (6) from dust cap (2). Discard gaskets (5) and (6).
INSTALLATION
NOTE
Fill end female/female elbow will require two new gaskets.
1. Place new gasket (5) into elbow (1) and new gasket (6) in dust cap (2).
2. Install elbow (1) onto flanged adapter (4), by pushing inward on cam-lever arms (3) to lock elbow (1)
into position.
3. Install the dust cap (2) onto the elbow (1) by pushing inward on the cam-lever arms (3) on dust cap
(2) to lock into position.
END OF WORK PACKAGE
1
2
3
4
5
6
|
