 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-5430-239-12&P
0030 00
ASSEMBLY
1. Lubricate new gaskets (10) with silicone compound.
2. Place one gasket (10) on male disconnect coupling (3). Position other gasket (10) on strainer (11) of
berm liner (9).
3. Position male disconnect coupling (3) on berm liner (9) and align the fastening holes.
4. Install male disconnect coupling (3) to berm liner (9) with eight screws (7) and washers (8), by hand
tightening screws (7).
5. Torque all screws (7) to 10 ft-lbs (13.50 Nm).
6. Install new gasket (4) in dust cap (5).
7. Attach chain assembly (6) to male disconnect coupling (3) and dust cap (5).
8. Place drain fitting assembly elbow (2) on male disconnect fitting (3). Push inward on cam-lever arms
(1) to lock drain fitting assembly elbow (2) onto male disconnect coupling (3).
END OF WORK PACKAGE
0030 00-3/4 blank
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals