LUBRICATION INSTRUCTIONS - TM-10-5430-239-12-P0114

TM 10-5430-239-12&P

0017 00

CAUTION

Report Class III and IV leaks to the supervisor or unit maintenance.

Failure to heed this caution can damage the equipment.

NOTE

Equipment operation is allowed with minor leakages (Class I or Class II.)

Consideration must be given to fluid capacity in the item/system being

checked/inspected. When in doubt, notify your supervisor.

When operating with Class I or Class II leaks, continue to check fluid levels as

required in the PMCS.

Class I

Seepage of fluid (as indicated by wetness or discoloration) not great enough to form drops.

Class II

Leaks of fluid great enough to form drops but not enough to cause the drops to drip from item

being checked/inspected.

Class III Leakage of fluid great enough to form drops that fall from the item being checked/inspected.

Class IV Leakage found under the tank. There is evidence of dampness on the ground around the tank.

Volume of fuel in tank is less than it should be.

LUBRICATION INSTRUCTIONS

Lubricate all cam-lever arms and lobes systematically with two drops of lubricating oil

(Item 7, WP 0041 00). These instructions are mandatory.

0017 00-2