Folding Instructions (Model GTA-210KF)-continued

TM 10-5430-239-12&P

0005 00

WARNING

Lifting or moving fuel tanks, berm liners or heavy equipment incorrectly

can cause serious injury. Do not lift or move more than 50 pounds (22.7 kg)

alone. Always get help from additional personnel or use proper lifting

equipment during lifting operations.

f. Measure 15 inches (38.1 cm) from edge of access fitting on top of tank towards West end. From

this point, measure 88 inches (223.52 cm) towards East end of tank and insert metal bar or

wooden plank under folded tank and lift up and fold to line 15 inches (38.1 cm) West of access

fitting, creating a pleated fold.

88 IN

g. Go to East end. Lift and fold over folded tank bundle. Fold back and forth, wig-wag.

h. Measure 99 inches (251.46 cm) from edge of folded bundle towards West end. At this point,

insert bar under tank and lift up onto top of bundle. Fold to edge of tank bundle.

i. Lift West end and fold back and forth, wig-wag, until tank is folded into a compact bundle.

j. Insert lifting straps, as follows: Measure approximately 30 inches (76.2 cm) from center of tank in

both East and West directions. At these points, lift folded tank with bar and insert lifting straps.

END OF WORK PACKAGE

0005 00-24