Tank Removal

TM 10-5430-239-12&P

0005 00

Tank Removal

NOTE

Model GTA-210KF does not have a skid.

1. Remove the three 3-inch (7.62 cm) tie-down straps (3) from skid (1) and tank (2). Retain for future

deployment.

WARNING

Lifting or moving fuel tanks, berm liners or heavy equipment incorrectly

can cause serious injury. Do not lift or move more than 50 pounds (22.7 kg)

alone. Always get help from additional personnel or use proper lifting

equipment during lifting operations.

CAUTION

Do not lift tank without the use of slings and authorized lifting equipment.

Damage to tank may result.

NOTE

If authorized lifting equipment is available, lift tank using lifting slings and remove

skid from area. When lowering tank to ground, be sure to return it to its original

position. Proceed to step 5 to complete tank deployment. If authorized lifting

equipment is not available, continue with step 2.

2. Fold back lifting slings (4). Make sure lifting slings (4) are lying flat. The slings and line will be used

during re-deployment.

CAUTION

Do not drop sharp objects on the tank. Walk on the tank as little as possible.

Do not drive vehicles over the tank. Failure to observe these precautions may

result in punctures, tears, or scuffs on the tank body.

3. Unroll one end of tank (2) by pushing on roll.

NOTE

Do not unroll both ends. Wait until shipping skid has been removed and placed

outside site area.

0005 00-5