 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-5430-238-12&P
0029 00
2. Clean packing groove thoroughly with detergent and hot water.
3. Inspect all mechanical parts for cracks, dents, breaks, and wear. Replace the component if
unserviceable.
9
6
5
8
7
1
4
2
3
ASSEMBLY
1. Attach chain assembly (6) to flanged adapter (5).
2. Apply sealing compound or anti-seize tape to screws (7) threads.
3. Lubricate new O-ring (9) with silicone compound. Position O-ring (9) into groove on the tank fitting.
4. Position flanged adapter (5) on the tank fitting, and align the fastening holes.
5. Install flanged adapter (5) to the tank fitting with screws (7) and washers (8).
6. Torque screws (7) to 30 in-lbs (3.41 Nm).
7. Connect female quick-disconnect coupling (3) to flanged adapter (5), pushing cam-lever
arms (4) in on female quick-disconnect coupling (3).
8. Install dust cap (2) on female quick-disconnect (3) and push in on cam-lever arms (1).
END OF WORK PACKAGE
0029 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals