DISASSEMBLY - TM-10-5430-238-12-P0106

TM 10-5430-238-12&P

0020 00

DISASSEMBLY

1. Remove cotter pin (1) and pin (2) from handle (3).

2. Lift handle (3) and attached spring (4) from valve stem (5).

3. Remove two socket head screws (6) and stop plate (7) from valve body (8).

4. Remove top seal (9) from the bottom of stop plate (7).

5. Remove top valve stem (5) assembly from valve body (8).

6. Remove seal (10), O-ring (11), top bearing (12), and O-ring (13) from top valve stem (5).

7. Drive spring pin (14) from valve body (8) and bottom valve stem (15).

8. Remove bottom valve stem (15) assembly from valve body (8).

9. Remove bottom bearing (16) and O-ring (17) from bottom valve stem (15).

10. Remove disk (18) from valve body (8).

11. Remove sleeve (19) from valve body (8).

SERVICE

1. Wash all components with clean hot water and detergent.

2. Rinse components in clean water and dry with rags.

3. Inspect the valve body, handle, disc, and stop plate for cracks and corrosion.

4. Inspect the top valve stem and bottom valve stem for cracks, deep scratches, and corrosion.

5. Replace damaged parts.

0020 00-3