|
| |
TM 10-5430-237-12&P
0011 00
0011 00-1
OPERATOR MAINTENANCE
FOOT BELLOWS (MODELS 91038/WT2008)
INSPECTION, REPAIR AND REPLACEMENT
INITIAL SETUP
Materials/Parts
Mandatory Replacement Parts
Rag, wiping
Preformed packing
(Item 2, WP 0030 00)
(Item 2, WP 0033 00)
INSPECTION
Hose
1. Clean hose (1) with a damp rag.
2. Inspect hose (1) for cuts or other damage.
3. Inspect male fitting (2) and female fitting (3) for cracks, worn or damaged threads, or other damage.
Foot Bellows
1. Clean foot bellows (4) with a damp rag.
2. Inspect fitting (5) for cracks, worn or damaged threads, or other damage.
3. Inspect bellows (6) for cuts, punctures or other damage.
4. Work the foot bellows (4) up and down to ensure it operates freely and will provide air pressure
through the fitting (5).
5. Inspect o-ring (7) for cracks, deterioration or cuts.
|
