|
| |
TM 10-5430-237-12&P
0005 00
0005 00-15
Folding – GTA-Z60TPW
CAUTION
Make sure tank is completely dry before folding. Water will create mildew,
decreasing the life of the tank if it is not completely dry.
NOTE
Ensure fill/discharge fittings are positioned at the perimeter of the tank.
Throughout the folding process, be sure to brush off any stones, grass,
or other debris that may accumulate on the tank or the ground cloth.
Two personnel are required when folding and rolling up the tank and
ground cloth to ensure that a tight bundle results.
1. Lay the tank out flat on the ground with the tank opening up.
2. Grasp one side of the tank (2) and fold inward toward the center (3).
3. Grasp opposite side of the tank and fold inward other the first fold (4).
4. Fold any overhang of the second fold back on top of itself (4).
5. Starting at one end of the tank (5), tightly fold up the tank (6).
6. Lay the ground cloth/valise out flat on the ground (7).
CAUTION
Do not walk on the ground cloth. Damage may occur.
7. Place the rolled tank in the center of the ground cloth (7).
8. Fold one side of the ground cloth in over the tank (8).
9. Fold the other side of the ground cloth in over the first fold (9)
10. Starting at one end (10), fold the ground cloth up in a tight bundle with the tank bundle inside (11).
11. Lift bundle and position carrying straps underneath.
12. Secure straps around the bundle using loops to tie (12).
13. Place tank bundle into shipping container.
|
