|
| |
TM 10-5430-237-12&P
0005 00
0005 00-2
Assembly
1. Unroll the tank and unfold the sides (9 through 12).
2. Perform the before preventive maintenance checks and services (PMCS) WP 0009 00.
3. In the installation area (13), fully spread out the tank, open end up, on the pre-positioned ground cloth.
MODEL GTA-Z60TPW ASSEMBLY AND PREPARATION FOR USE
CAUTION
Damage to tank may occur if chosen site is not free of sharp objects (rocks, sticks,
glass, etc.) and a 10 percent slope [1 foot (0.3 meter) rise in 10 foot (3 meters)
run] is exceeded.
Unpacking the Equipment
1. Position the packaged tank on an approved site.
|
