|
| |
TM 10-5430-236-12&P
0008 00
0008 00-3
PREPARATION FOR MOVEMENT
WARNINGS
Do not touch cold metal parts with bare hands when operating under arctic
conditions. Frostbite can cause permanent injury.
To prevent damage to tank, remove gravel, rocks, and debris from bottom of shoes
before walking on tank fabric.
Fuel is toxic to skin, eyes and respiratory tract. Wear skin and eye protection when
handling components.
Avoid spillage of fuel. Drain fuel in an adequate container, otherwise a fire hazard
or environmental contamination could result.
Disconnect Tank Vent Pipe and Filler/Discharge Elbows and Hoses
1. Open tank drain gate valves (1) and drain fuel into a suitable container.
2. Disconnect discharge hose assembly (2) from discharge elbow (3).
3. Remove discharge elbow (3) and install dust cap (4) on discharge coupling half (5).
4. Disconnect filler hose assembly (6) from filler elbow (7).
5. Remove filler elbow (7) and install dust cap (8) on filler assembly coupling half (9).
6. Remove vent pipe assembly (10) and install dust cap (11) on tank vent coupling half (12).
3
4
5
2
12
10
11
7
9
8
6
1
1
|
