|
| |
TM 10-5430-236-12&P
0007 00
0007 00-9
Installing Collapsible Fabric Petroleum Tank - Continued
WARNING
Do not touch cold metal parts with bare hands when operating under arctic
conditions. Frostbite can cause permanent injury.
Connect Tank Vent Pipe and Filler/Discharge Elbows and Hoses
1. Remove dust cap (1) from coupling half (2).
2. Install vent pipe (3) on coupling half (2) and lock in place.
3. Remove dust cap (4) from coupling half (5) on tank.
4. Install 4-inch (10.16cm) female to female elbow (6) on coupling half(5) and lock in place.
5. Install male coupling half (7) end of the 20-foot long (6.1m), 4-inch (10.16cm) collapsible filler hose (8)
into filler female-to-female elbow (6) and lock in place.
6. Remove dust cap (9) from 6 inch (15.24cm) coupling half (10) on tank.
7. Install 6-inch (15.24cm) female to male elbow (11) on coupling half (10) and lock in place.
8. Install female coupling half (12) end of the 10-foot long (3.05m) , 6-inch (15.24cm) discharge hose (13)
over the female to male elbow (11) and lock in place.
4
8
|
