| |
TM 10-5430-236-12&P
0006 00
0006 00-4
Table 1. Preventative Maintenance Checks and Services
ITEM
NO.
INTERVAL
MAN-
HOUR
ITEM TO BE CHECKED
OR SERVICED
PROCEDURE
EQUIPMENT
NOT READY/
AVAILABLE IF:
4
Before
Berm Liner Drain Hose
Assembly (4)
a. Inspect hoses for
punctures or tears.
b. Inspect hose coupling
halves for damaged or
missing gasket.
Puncture or tear
found.
Damaged
coupling halves,
missing or
damaged gasket.
5
Before
Berm Liner Drain Gate
Valve Assemblies (5)
a. Check for loose or
missing hand wheels,
missing screws, and
nuts.
b. Open and close valves.
Valve should move
freely.
Hardware loose
or missing.
Valve sticks or
binds.
6
Before
Tank (6)
Inspect for damaged or
missing dust caps.
Check dust caps for
damaged or missing
gaskets.
Dust caps
damaged or
missing. Gaskets
damaged or
missing.
7
Before
Vent Fitting Assembly
(7)
a. Inspect vent fitting
coupling half for cracks
and damaged locking
arms.
b. Inspect for damaged or
missing coupling half
gasket.
c. Lift relief cap and
check for free
movement. Inspect for
cracks, bends, and
bent or broken pivot
pin.
d. Inspect pipe for cracks
or damage.
e. Inspect for loose or
missing screws on
fittings.
Coupling half
cracked. Locking
arms damaged.
Coupling half
gasket damaged
or missing.
Relief cap binds
or is damaged.
Pipe is cracked
or is damaged.
Screws loose or
missing.
|