| |
TM 10-5430-236-12&P
0026 00
0026 00-2
WARNING
Do not use excessive pressure when applying sealing compound onto threads.
Sharp thread edges can cause injury.
2. Apply sealing compound to threads of male coupling half (11) and install in valve assembly (7).
3. Connect two key holders (8) on chain (9), dust cap (10), and male coupling half (11).
4. Insert new gasket (13) in dust cap (10).
5. Install dust cap (10), male coupling half (11), and lock in place with locking arms (12).
6. Apply sealing compound to threads of female coupling half (4) and install in valve assembly (7).
CAUTION
Ensure gasket is fully seated in groove of female coupling half to prevent leaks in
assembled components.
7. Insert new gasket (6) in female coupling half (4).
8. Connect two key holders (1), on chain (2), dust plug (3), and female coupling half (4).
9. Install dust plug (3) in female coupling half (4) and lock in place with locking arms (5).
10. Install gate valve assembly (WP 0007 00).
END OF WORK PACKAGE
|