|
| |
TM 10-5430-232-12&P
SECTION III OPERATOR MAINTENANCE
3-4. GENERAL INSTRUCTIONS. Maintenance instructions in this section will list resources required,
personnel required, and equipment condition for start of procedure, except as noted below:
a. Personnel required are listed only if the task requires more than one.
b. The normal standard equipment condition to start a maintenance task is fuel tank drained and
deflated. EQUIPMENT CONDITION is not listed unless some other condition is required.
3-5. Quick-is connect Coupling Maintenance
This task covers:
Repair
Materials/Parts
INITIAL SETUP
Gasket, Appendix D, Section II item 16
Key Rings, Appendix F, Section II, items 10 and 11
Tools: N/A
Equipment Condition: Quick Disconnect coupling removed from tank and/or valve.
Repair: Refer to Figure 3-1
1. Remove gasket (1) from female coupling half (2).
2. Remove key rings (3) from cam-lock levers (4).
3. Install key rings (3) onto cam-lock levers (4).
4. Install gasket (1) into female coupling half (2).
Figure 3-1. Quick-Disconnect Coupling
Change 1
3-9/(3-10 blank)
|
