|
| |
TM 10-4930-250-13&P
1.9.4.2
D-1 Nozzle Assembly.
The D-1 nozzle assembly (1), figure 1-7, is a four part assembly: D-1 nozzle (2) with a ground cable assembly (3), 45 psi
regulator (4), 45 degree inlet (5), and a two-inch, non-valved unisex coupling (6). All the component parts rotate around the
inlet/outlet for easier connection to the aircraft receiver and fuel hose. For a detailed description refer to
TM 10-4930-246-13&P.
6
5
4
2
3
Figure 1-7. D-1 Nozzle
Assembly
1.9.4.2
CCR Nozzle Assembly
The CCR nozzle assembly (1), figure 1-8, consists of a standard CCR nozzle (2) fitted with a two-inch unisex coupling (3)
and a grounding cable (4). A Gravity
Fill Adapter (GFA) (5) is used in conjunction with the CCR nozzle assembly (1) to
allow open port fueling
of equipment not equipped with a standard CCR receiver. For a detailed description refer to
TM 10-4930-248-13&P.
2
1
3
4
5
Figure
1-8.
CCR
Nozzle
Assembly
and Gravity
Fill Adapter
1-12
|
