|
| |
TM 10-4930-248-13&P
5-3.
CCR NOZZLE, PISTON MODEL, ASSEMBLY REPAIR - continued.
CAUTION
To reduce the friction between locking lugs and collar, pull back slightly on
the collar.
NOTE
Always align the slot in the collar and the tab on the housing.
(20) Tighten the assembly to 250 in. lbs.
(21) Pull back on the collar (27) to release the body wrench, remove body wrench. Remove nozzle
assembly from vise.
(22) Insert flow guide (31), spring (28) and sleeve seal (30) into nozzle housing (14).
COMPRESSION
POPPET
t@@
TOOL
WRENCH
CX)
30
28
29
31
14
14
5-34
Change 1
|
