|
| |
TM 10-4930-248-13&P
5-2.
CCR NOZZLE ASSEMBLY REPAIR - continued.
a.
Disassembly
- continued.
(7)
On the nozzle left side, remove
screw (9), one washer
(10), bushing
(11) and side plate (12).
Remove bushing
(11) and washer
(10) from screw (9). Remove second washer
(10) from
housing (17).
(8)
On the right side of nozzle loosen screw (9) only.
(9)
While compressing
valve latch actuator
(15) on right side of nozzle, remove
screw (9), one
washer
(10), bushing
(11) and side plate (12). Remove bushing
(11) and washer (10) from
screw (9). Remove second washer (10) from housing
(17).
(10)
Slowly release latch actuator
(15) and remove along with spring (16) from housing
(17).
NOTE
Do not remove
screw and actuating
cam from side
plate unless damaged
and replacement
is required.
(11)
Hold the actuating
cam (14) in place with a soft jaw chuck or vise and remove screw (13)
from side plate (12).
9
13
7
12
1
3
2
CRI
10
11
Lb,
14
6
4
16
15
10
5
d@o
14
12
10
17
10
13
9
PISTON
COMPRESSION
TOOL
5-3
|
