|
| |
TM 10-4930-247-13&P
3-4. COMPONENT REPLACEMENT - cont.
b.
Installation. Refer to figure 3-2.
(1)
Position replacement component (7) in fuel system (8).
(2)
Disconnect dust cap (6) from valved coupling (4).
(3)
Disconnect dust cap (5) from valved coupling (2).
(4)
Connect dust cap (5) to dust cap (6).
(5)
Connect valved coupling (3) to valved coupling (4).
(6)
Set control handle (3) on valved coupling (4) to OPEN.
(7)
Set control handle (1) on valved coupling (2) to OPEN.
(8)
Repeat steps (2) through (7) for other end of replacement component (7).
(9)
Startup fuel system (para 2-12f) and check for leaks at replaced component (8).
3-14
|
