|
| |
TM 10-4930-246-13&P
CHAPTER 5
DIRECT SUPPORT MAINTENANCE
INSTRUCTIONS
Section I. REPAIR PARTS, TOOLS, SPECIAL TOOLS, TEST
MEASUREMENT,
AND DIAGNOSTIC EQUIPMENT (TIVIDE), AND SUPPORT
EQUIPMENT
5-1.
COMMON TOOLS AND EQUIPMENT.
For authorized common tools andequipment refer to the Modified Table of OrganizationandEquipment(MTOE)
CTA 50-970 as applicable to your unit.
5-2.
SPECIAL TOOLS.
The following special tool is required for direct support maintenance. Use of this tool is described in SectionIII
of this chapter.
Pressure Fuel Servicing Adapter (96906) MS24484.
5-3.
REPAIR PARTS.
a. Mandatory replacement parts are listed in Appendix J of this manual.
b. Repair parts are listed and illustrated in Appendix C of this manual.
Section II. DIRECT SUPPORT TROUBLESHOOTING
PROCEDURES
Direct support troubleshooting procedures are not required.
Section III. DIRECT SUPPORT MAINTENANCE
PROCEDURES
The procedures in this section have been arranged in the order in which the items appear in the direct support (F)
maintenance level column on the Maintenance Allocation Chart (MAC) which is provided in Appendix B. Step-by-step
procedures have been provided for all actions authorized to be performed by direct support maintenance in the order in
which they appear on the MAC.
5-1
|
