| |
TM 10-4930-246-13&P
Table2-1.1 OperatorPreventiveMaintenance
Checks
andServicesforD-1RNozzle
Location
Item
Interval
Item to Check/Service
Procedure
Not Fully Mission Capable If:
No.
11
After
Nozzle Body Assembly
While disconnecting the nozzle, if
Pins do not spring back into collar
the collar pins are not extended
cutouts.
and engaged in all three cutouts in
the collar, the operator should
squeeze the lever and handle grip
together while observing the
connecting end of the nozzle. This
should cause the collar lock pins to
spring into the cutouts in the
collar. Failure of above could also
indicate mating adapter problems.
After
Check that dust cover is in place
and in good condition.
After
Attempt to open the nozzle with
Nozzle opens.
the lever.
COLLAR LOCK PINS
LEVER
DUS
COVER
INDEX PINS
2-12.4
Change 1
|