|
| |
TM 10-4930-246-13&P
Section I. DESCRIPTION AND USE OF OPERATOR'S CONTROLS AND
INDICATORS
2-1.
GENERAL.
The only operator controls are the handles and the OPEN/CLOSE
lever. The only items that could be considered
indicators are the collar lock pins. See paragraph 1-9 and Table 2-1 PMCS for a better understanding of the collar lock
pins.
COLLAR LOCK PINS
F ANDLE
0
cl)
HANDLE
- LEVER
Figure 2-1.
Operator's
Controls and Indicators
Section II. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND
SERVICES (PMCS)
2-2.
GENERAL
Preventive Maintenance Checks and Services means systematic caring, inspection, and servicing of equipment to
keep it in good condition and ready to use. As the operator, your mission is to:
(1) Be sure to perform your PMCS each time you use the Nozzle.
(2) Do your "Before" PMCS just before you use the Nozzle.
(3) Do your "During"
PMCS while you use the nozzle.
(4) Do your "After" PMCS right after using the Nozzle.
(5) Use DA Form 2404 (Equipment Inspection and Maintenance Worksheet) to record any faults that you
discover before, during, or after use, unless you can fix the fault. You DO NOT need to record faults that you fix.
2-2
|
