|
| |
TM 10-4930-245-13&P
5-2.
CCR NOZZLE ASSEMBLY REPAIR - continued.
c.
Assembly - continued.
(11)
Lubricate packing (37) with silicone compound and install into housing (17).
(12)
Slide housing (17) into collar (28). Align the notch on the collar with the tap on top of housing.
CAUTION
Using the lug assembly tool to tighten body. Use the body wrench to
complete the tightening process.
(13)
Push down on housing (17) and rotate clockwise until tab contacts the collar (28). Rotate hosing (17)
counterclockwise until notch and tab are aligned.
(14)
Remove the assembled components from lug assembly tool and remove tool from vise. c.
5-11
|
