|
| |
TM 10-4930-245-13&P
CHAPTER 1
INTRODUCTION
Section I.
GENERAL INFORMATION
1-1.
SCOPE.
a.
Type of Manual. Operator's, Unit, and Direct Support Maintenance Manual, including Repair Parts and
Special Tools List (RPSTL).
b.
Model Number and Equipment Name. Model #64017 Nozzle Assembly, Closed-Circuit Refueling.
c.
Purpose of Equipment. Closed Circuit Refueling Nozzle Assembly is used to refuel vehicles and helicopters.
It mates with a closed-circuit adapter on the vehicle and features a quick-disconnect shutoff.
1-2.
MAINTENANCE FORMS, RECORDS AND REPORTS.
Maintenance forms and records that you are required to use are DA Form 2402 (Exchange Tag), DA Form 2407
(Maintenance Request), and Standard Form 368 (Quality Deficiency Report). Their use and procedures for filling these
forms are explained in DA PAM 738-750, The Army Maintenance Management System (TAMMS).
1-3.
DESTRUCTION OF ARMY MATERIEL TO PREVENT ENEMY USE.
Refer to TM 750-244-3 for instructions for destruction of equipment to prevent enemy use.
1-4.
CORROSION PREVENTION AND CONTROL (CPC).
Corrosion Prevention and Control (CPC) of Army materiel is a continuing concern. It is important that any corrosion
problems with this item be reported so that the problem can be corrected and improvements made to prevent the
problem in future items.
While corrosion is typically associated with rusting of metals, it can also include deterioration of other materials, such as
rubber and plastic. Unusual cracking, softening, swelling or breaking of the materials may be a corrosion problem.
If a corrosion problem is identified, it can be reported using Standard Form 368, Product Quality Deficiency Report.
Using key words such as "corrosion", "rust", "deterioration", or "cracking" will ensure that the information is identified as a
CPC problem.
The form should be submitted to the address specified in DA PAM 738-750.
1-1
|
