|
| |
TM 10-4930-243-13&P
Section IV. OPERATION UNDER UNUSUAL CONDITIONS.
2-12. UNUSUAL ENVIRONMENTAL/WEATHER.
a. Operating the CCR Nozzle and Adapter In Extreme Cold Conditions. Observe the following precautions when
operating the CCR Nozzle in extreme cold conditions.
WARNING
Do not touch cold metal parts with bare hands when operating under extreme cold conditions. Frostbite
can cause permanent injury.
(1) Always wear arctic mittens when handling nozzle and other equipment.
(2) Be careful when handling nozzle and hose assembly to avoid cracking hose.
CAUTION
Accumulated ice and snow can cause damage to the nozzle assembly.
(3) Remove snow, sleet or ice from nozzle before refueling.
(4) Always keep cap on the CCR nozzle and adapter when not in use.
(5) Perform operating procedure according to paragraph 2-10.
b. Operating the CCR Nozzle and Adapter in Strong Winds and Sandy or Dusty Conditions.
(1) Strong Winds.
(a) Should not affect the performance or handling of the nozzle.
(b) Perform operating procedures according to paragraph 2-10.
(2) Sandy or Dusty Conditions.
(a) Remove any sand or dust from the nozzle before installing to either hose or adapter.
(b) Keep the protective cap installed when not in use.
(3) Perform operating procedure according to paragraph 2-10.
c. Operating the CCR Nozzle and Adapter In Extreme Heat Conditions.
(1) This equipment should not be operated when the ambient temperature is above 95°F.
(2) Perform operating procedure according to paragraph 2-10.
2-15
|
