| |
TM 10-4930-242-13&P
5-2.
D-1 FUELING NOZZLE REPAIR - continued.
(20)
Place nozzle in soft faced vise.
(21)
Lubricate one packing (28) with silicone compound and insert into groove m body (47) Apply additional
silicone compound to packing.
WARNING
Personal injury may occur when handling bellows. Bellows has sharp
edges. Handle bellows with care.
(22)
Lubricate lip of bellows (27) with silicone compound and gently press and turn into body (47)
(23)
Lubricate second packing (28) with silicone compound and insert into beveled end of retainer (26).
(24)
Lubricate nose seal (25) and install into retainer (26). Be sure nose seal is completely seated m retainer.
(25)
Lubricate lip of bellows (27) and install retainer (26) on bellows by gently pushing and turning.
(26)
Lubricate second packing (24) with silicone compound and install on screw (23).
(27)
Insert screw (23) into poppet (19).
(28)
Position strainer (20) on poppet (19) and install washer (22) on screw (23).
NOTE
When installing retaining ring, align closed end with welded seam of
screen before pressing retaining ring onto screw.
(29)
Install retaining ring (21) on screw (23).
(30)
Move handle assembly (42) to the open position and install poppet (19) and strainer (20) into body (47) and
tighten screw (23) into nozzle shaft (38).
(31)
Move handle assembly (42) to the closed position.
5-14
|