|
| |
TM 10-4930-242-13&P
5-2.
D-1 FUELING NOZZLE REPAIR - continued.
(10)
Turn handle assembly (47) to open poppet (19).
NOTE
Screw is retained on poppet by retaining ring
(11)
Loosen screw (23) to disengage it from nozzle shaft (38).
(12)
Remove poppet (19) and strainer (20) from body (47).
(13)
Align welded seam of strainer (20) with the closed side of retaining ring (21). Remove retaining ring (21).
(14)
Remove strainer (20) and washer (22) from screw (23).
(15)
Remove screw (23) and one packing (24) from poppet (19).
(16)
Remove one packing (24) from screw (23) and discard.
(17)
Remove nose seal (25), retainer (26), bellows (27), two packings (28) from nozzle body (47). Discard nose
seal (25) and two packings (28).
5-6
|
