|
| |
TM 10-4930-242-13&P
2-9. DECALS AND INSTRUCTION PLATES.
Decals and Instructions plates used in the D-1 nozzle are shown below.
Section IV. OPERATION UNDER UNUSUAL CONDITIONS.
2-10. UNUSUAL ENVIRONMENTAL/WEATHER CONDITIONS.
a.
Operating The D-1 Nozzle in Arctic Conditions.
WARNING
Touching cold metal with exposed skin will cause skin to
bond to metal. Gloves are required when touching cold
metal objects. Do not touch cold metal parts with bare
hands.
(1) Always wear arctic mittens when handling nozzles and other equipment.
(2) Be careful when handling the nozzle when connected to a hose to avoid cracking them
CAUTION
Accumulated ice and snow can cause damage to nozzle
assembly.
(3) Remove snow, sleet, or ice from the nozzle before connecting to the adapter
(4) Always keep dust cap on nozzle when not in use
(5) Perform operating procedure according to paragraph 2-8
NOZZLE
PRESSURE FUEL SERVICING
MFR'S CODE FSCM 0DT23
61629CDGH
2-13
|
