| |
TM 10-4930-241-13
2-16. ASSEMBLY AND PREPARATION FOR USE - CONT.
v.
Fire Extinguisher Installation. Refer to figure 2-30.
Before operating the AFSSP, fire extinguishers must be positioned in the fuel system in event of a fire.
Refer to local standard operating procedures for placement of fire extinguishers within the AFSSP
system.
WARNING
Do not touch surfaces with bare skin. Bare skin will freeze to metal
surfaces in subzero temperatures. Always wear arctic mittens when
handling components.
(1)
Lift handle (1) and unlatch hook (2) from fire extinguisher (3).
(2)
Remove fire extinguisher (3) from frame (4).
(3)
Repeat steps (1) and (2) for remaining fire extinguishers.
Figure 2-30. Fire Extinguisher Installation.
2-71
|