|
| |
TM 10-4930-241-13
2-16. ASSEMBLY AND PREPARATION FOR USE - CONT.
q.
Fuel System - Fuel Return Hoses Installation. Refer to figure 2-25.
WARNING
Do not touch surfaces with bare skin. Bare skin will freeze to metal
surfaces in subzero temperatures. Always wear arctic mittens when
handling components.
CAUTIONS
•
To prevent contamination of fuel system components use care
when connecting couplings to avoid getting metal, ice, snow,
dirt, sand and debris on coupling mating surfaces or in hoses
during assembly.
•
To prevent leaks and ensure tight connections, make sure arctic
gaskets are installed in all female quick disconnect couplings
before connecting components.
NOTES
•
This covers installation of a typical AFSSP system. You may
need to adjust the number of components used, and their
position in the system, to meet your mission requirements.
•
Refer to para 2-16e for connection of quick disconnect couplings.
(1)
Connect together twelve 10 foot 6-inch non- collapsible hoses (1).
(2)
Connect one end of non- collapsible hoses (1) to 6-inch fueling manifold (2) on input side of secondary 600
GPM pump (3).
(3)
Connect 6-inch male x 4- inch female reducer (4) to other end of noncollapsible hoses (1).
(4)
Connect other end of reducer (4) to 4-inch fueling manifold (5) with five valves.
2-61
|
