|
| |
TM 10-4930-241-13
2-16. ASSEMBLY AND PREPARATION FOR USE - CONT.
p.
Fuel System - Fuel Tank, Secondary 600 GPM Pump and Filter-Separator Bypass Hoses. Refer to figure 2-24.
WARNING
Do not touch surfaces with bare skin. Bare skin will freeze to metal
surfaces in subzero temperatures. Always wear arctic mittens when
handling components.
CAUTIONS
•
To prevent contamination of fuel system components use care
when connecting couplings to avoid getting metal, ice, snow,
dirt, sand and debris on coupling mating surfaces or in hoses
during assembly.
•
To prevent leaks and ensure tight connections, make sure arctic
gaskets are installed in all female quick disconnect couplings
before connecting components.
NOTES
•
This covers installation of a typical AFSSP system. You may
need to adjust the number of components used, and their
position in the system, to meet your mission requirements.
•
Refer to para 2-16e for connection of quick disconnect couplings.
(1)
Connect together four 50 foot 4-inch collapsible hoses (1).
(2)
Connect one end of collapsible hoses (1) to 4-inch valve section (2) on fill side of fuel tank (3).
(3)
Connect other end of collapsible hoses (1) to 4-inch fueling manifold (4).
2-59
|
