|
| |
TM 10-4930-241-13
2-16. ASSEMBLY AND PREPARATION FOR USE - CONT.
(6)
Assemble and prepare filter-separators for use. Refer to TM 10-33- 23613.
d.
Install 600 GPM Pump External Fuel Can, Adapter and Fuel Hose. Refer to figure 2- 12.
(1)
Remove cap (1) from fuel can (2).
(2)
Lower handle (3) on adapter (4) to release position.
(3)
Place adapter (4) in fuel can (2).
(4)
Press adapter (4) into neck of fuel can (2) and raise handle(3) to lock position. Adapter seal will expand and
secure adapter in place.
(5)
Remove cap (5) from external fuel connector (6) on 600 GPM pump (7).
(6)
Connect one end of fuel hose (8) to external fuel connector (6) on 600 GPM pump (7).
(7)
Connect other end of fuel hose (8) to coupling (9) on adapter (4).
Figure 2-12. External Fuel Tank Installation.
2-36
|
