|
| |
TM 10-4930-241-13
4-16. MANIFOLD (4-INCH/ONE VALVE) REPAIR - cont.
(4)
Connect chain (31) and split rings (30 and 32).
(5)
Position flange gasket (29) and gate valve (24) on tee (12).
(6)
Install cap screws (28), flat washers (27), lockwashers (26) and nuts (25). Tighten nuts
evenly in a cross pattern.
(7)
Position flange gasket (23) and male coupling half 122) on gate valve (24).
(8)
Install cap screws (21), flat washers (20), lockwashers (19) and nuts (18). Tighten nuts
evenly in a cross pattern.
(9)
Install gasket (17) in dust cap (16). Connect dust cap to male coupling half (22).
(10)
Connect chain (14) and split rings (13 and 15).
(11)
Position flange gasket (11) and female coupling half (5) on tee (12).
(12)
Install cap screws (10), flat washers (9), lockwashers (8) and nuts (7). Tighten nut evenly
in a cross pattern.
(13)
Install gasket (6) in female coupling half (5).
(14)
Connect dust plug (4) to female coupling half (5).
(15)
Connect chain (2) and split rings (1 and 3) to dust plug (4).
4-20
|
